Garmin GPSMAP 376C User Manual Page 133

  • Download
  • Add to my manuals
  • Print
  • Page
    / 152
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 132
To set up Loran TD from the Main Menu:
1. Highlight the Setup tab on the Main Menu, and then highlight
the Location sub tab.
2. Highlight the Location Format eld, and press ENTER.
Location Sub Tab
3. Highlight Loran TD, and press ENTER.
4. Highlight the Setup button located on the right side of the
Location Format eld, and press ENTER. The Loran TD
Setup window opens.
5. To change the settings of any of the ve elds, highlight
the eld, press ENTER, select a setting, and press ENTER
again.
LORAN TD Setup
6. When nished, highlight the Save button, and press ENTER.
If the active GRI Chain, secondary stations, or offsets were changed
since the waypoint was created, the waypoint references the active
GRI chain and secondary stations and adjust the TD coordinates
accordingly. Remember that the GPS is not relying on the LORAN
signal for navigation and actually converts the TD coordinate to a
useful latitude and longitude coordinate before storing the waypoint
to memory or using it for navigation. Because of this, the unit can
navigate to a TD coordinate anywhere in the world.
You must know your GRI chain number and secondary stations
to create a LORAN TD position. For more information, read our
LORAN TD Position Format Handbook, available at the Garmin
Web site at www.garmin.com/support/userManual.html.
GPSMAP 376C Owner’s Manual 125
APPendIX > lorAn td setuP
Page view 132
1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 151 152

Comments to this Manuals

No comments