Garmin STC for Bell 206/407 User Manual Page 6

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 5
190-01150-12 Rev. B RFMS Garmin G500H as installed in Bell 206A
Page 6 of 24 FAA APPROVED
Section 2. OPERATING LIMITATIONS
2.1 Types of Operation
Rotorcraft equipped with the G500H Avionics Display System are limited to
VFR ONLY operations in accordance with 14 Code of Federal Regulations
Part 91 and Part 135.
2.2 Cockpit Reference & Pilot’s Guides
Garmin G500H Cockpit Reference Guide P/N 190-01150-03, Revision A or
later appropriate revision must be immediately available to the flight crew.
2.3 System Software Requirements
The G500H must utilize the following approved software versions:
Component
Identification
Software Version
(or later FAA approved)
GDU 620
PFD/MFD
5.01
GRS 77H
AHRS
3.52
GDC 74H
Air Data Computer
3.10
GMU 44
Magnetometer
2.01
Table 1-1 G500H Software Versions
In addition to the main components of the G500H, at least one Garmin
GPS/WAAS navigator must be interfaced to the G500H. Any GPS/WAAS
systems connected to the G500H must utilize the following applicable software
versions:
Component
Identification
Software Version
(or later FAA approved)
GNS 400W Series
GPS/WAAS NAV
3.30
GNS 500W Series
GPS/WAAS NAV
3.30
GNS 480/CNX80
GPS/WAAS NAV
2.2
GTN 6XX Series
GPS/WAAS NAV
4.00
GTN 7XX Series
GPS/WAAS NAV
4.00
Table 1-2 GNS Navigator Required Software Versions
2.4 Databases
The terrain databases are updated periodically and have no expiration date.
Coverage of the terrain database is between North 75° latitude and South 60°
latitude in all longitudes.
The obstacle database contains data for obstacles, such as towers, that pose a
potential hazard to aircraft. It is very important to note that not all obstacles are
necessarily charted and therefore may not be contained in the obstacle database.
Coverage of the obstacle database includes the United States and Europe. This
database is updated on a 56-day cycle.
Page view 5
1 2 3 4 5 6 7 8 9 10 11 ... 23 24

Comments to this Manuals

No comments