Garmin STC for Bell 206/407 User Manual download pdf (Page 15)

RFMS Garmin G500H as installed in Bell 206A 190-01150-12 Rev. B

FAA APPROVED Page 15 of 24

NOTE

The G500H Cockpit Reference Guide and the G500H Pilot’s

Guide contain detailed descriptions of the annunciator

system and all warnings, cautions and advisories.

Annunciation

Pilot Action

Cause

ATTITUDE FAIL Use visual references

Display system is not receiving

attitude reference information from

the AHRS; accompanied by the

removal of sky/ground presentation

and a red X over the attitude area.

AIRSPEED FAIL Use Standby Airspeed

Display system is not receiving

airspeed input from the air data

computer; accompanied by a red X

through the airspeed display.

ALTITUDE FAIL Use Standby Altitude

Display system is not receiving

altitude input from the air data

computer; accompanied by a red X

through the altimeter display.

VERT SPD FAIL Cross check instruments

Display system is not receiving

vertical speed input from the air

data computer; accompanied by a

red X through the vertical speed

display.

HDG

Use Standby Magnetic

Compass or GPS track

information

Display system is not receiving

valid heading input from the

AHRS; accompanied by a red X

through the digital heading display.

Red X

Reference the data source

or alternate equipment

A red X through any display field,

indicates that display field is not

receiving data or is corrupted.

TERRAIN

Visually acquire the

terrain and avoid

SVT Terrain has determined that

nearby terrain poses a collision

hazard.

OBSTACLE

Visually acquire the

obstacle and avoid

SVT Terrain has determined that a

nearby obstacle poses a collision

hazard.

Table 1 Warning Annunciations – Red

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 23 24

Comments to this Manuals

No comments

Garmin STC for Bell 206/407 User Manual Page 15

Comments to this Manuals

Related products and manuals for Car navigation systems Garmin STC for Bell 206/407