190-00356-38 Rev A1GNS 400W/500W Series SW Version 5.20 Upgrade SupplementThis supplement provides information regarding new features that have been
10190-00356-38 Rev ASection 4: Flight Plan ImportWhen the GNS is interfaced with Flight Stream 210, flight plans can be wireless-ly imported into the
11190-00356-38 Rev A2. The list of pending flight plans from Connext will be shown. Press the small right knob to activate the cursor and then turn th
12190-00356-38 Rev AViewing the Connext Flight Plan Import PagePending flight plans available through Connext will be shown. After a flight plan is impo
13190-00356-38 Rev ADelete All Pending Flight PlansThe Delete All Pending Flight Plan option deletes all of the pending flight plans in the list. 1. W
14190-00356-38 Rev AThis page intentionally left blank
© 2014 GARMIN CorporationGARMIN International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, U.S.A. Tel. 913/397.8200 or 866/739.5687 Fax 913/39
2190-00356-38 Rev APilot Guide Upgrade SupplementsThe following table lists the previous revisions of the Pilot Guides and The Upgrade Supplements whi
3190-00356-38 Rev APart Eight: Garmin Connext InterfaceSection 1: IntroductionGarmin ConnextTM is Garmin’s in-cockpit wireless connectivity system t
4190-00356-38 Rev ASection 2: Bluetooth StatusFrom the Bluetooth Status page, the pilot can change the Flight Stream Blue-tooth name, manage paired d
5190-00356-38 Rev A4. After pairing, the device names will show up in the Paired Devices sec-tion of the Bluetooth Status page. A filled-in square nex
6190-00356-38 Rev AAuto-ReconnectThe Auto-Reconnect function, when enabled, causes the GNS to automatically reconnect with the selected PED whenever i
7190-00356-38 Rev AUnpair DeviceThis function will unpair the selected PED so that the GNS will no longer com-municate with it. If the pilot removes a
8190-00356-38 Rev ASection 3: Device ConfigurationThe Device Configuration page shows the name of the connected device, soft-ware version of the device
9190-00356-38 Rev A3. Turn the small right knob to select the Flight Plan Import status of “Enabled” or “Disabled.” Press ENT to select the desired s
Comments to this Manuals