Garmin 3000 User Manual download pdf

GPSMAP

3000 Series Installation Instructions

The GPSMAP 3000 series chartplotter and GPS antenna must be properly installed according to the following instructions. You need the

appropriate fasteners, tools, and mounts listed in each section. These items are available at most marine dealers. Always wear safety goggles,

ear protection, and a dust mask when drilling, cutting, or sanding. When drilling or cutting, always check what is on the opposite side of the

surface. Mount the GPSMAP 3000 series chartplotter in a location that provides a clear, glare-free view of the display and easy operation of the

controls or touch screen. 







Before installing your GPSMAP 3000 series chartplotter, conrm that the package contains the items listed on the box. If any parts are missing,

contact your Garmin dealer immediately.

WARNING: See the Important Safety and Product Information guide in the product box for product warnings and other important

information.

To install the GPSMAP 3000 series chartplotter:

1. Mount the GPSMAP 3000 series chartplotter (Page 1).

2. Mount the GPS antenna (Page 3).

3. Connect the GPSMAP 3000 series device to power and to the GPS antenna (Page 6).

4. Ensure the chartplotter software is up-to-date (Page 10).

Although they are not necessary to use the GPSMAP 3000 chartplotter, you can also use this manual to:

Connect the chartplotter to NMEA 0183-compatible devices such as a VHF radio with DSC (Page 6).

Connect the chartplotter to an external alarm (Page 8).

Connect the chartplotter to a video input source (Page 8).

Connect the chartplotter to an external video monitor (Page 8).

Connect the chartplotter to other Garmin Marine Network compatible devices, such as a sounder or a radar (Page 9).

Mounting the GPSMAP 3000 Series Chartplotter

You can use the included bracket to bail mount the chartplotter, or you can use the included template and hardware to ush mount the

chartplotter.

Bail Mounting the GPSMAP 3000 Series Chartplotter

Use the included bracket to bail mount the GPSMAP 3000 series chartplotter.

Tools required (not included):

• Drill and drill bit

• Screwdriver

• Pencil

• Mounting hardware (screws or nuts, washers, and bolts)

The mounting hardware (screws or nuts, washers, and bolts) are not included. The holes on the bail mount are

in. (7.9 mm) in diameter.

Choose mounting hardware that ts the holes in the bail mount and securely attaches it to your specic mounting surface. The size of the drill bit

required depends on the mounting hardware chosen.

•

August, 2008 190-00991-02 Rev. A Printed in Taiwan

1 2 3 4 5 6 7 8 9 10

Summary of Contents

Page 1

GPSMAP® 3000 Series Installation InstructionsThe GPSMAP 3000 series chartplotter and GPS antenna must be properly installed according to the following

Page 2 - Mounting knobs

Final Wiring ConnectionAfter all the wiring is complete, the cables are attached on the backside of the GPSMAP 3000 series chartplotter. If the chartp

Page 3 - Installing the GPS Antenna

2 GPSMAP 3000 Series Installation InstructionsTo install the bail-mount bracket ➊:1. Using the bail mount as a template, mark the location of the fou

Page 4 - SS BARNETT

3GPSMAP 3000 Series Installation Instructions4. Usingthejigsaw,cutthemountingsurfacealongtheinsideofthesolidlineindicatedontheush-m

Page 5 - Wiring and Cables

4 GPSMAP 3000 Series Installation InstructionsThe GPS 17x antenna provides more-stable readings when located nearer to water level. 

Page 6 - Power/Data Cable Wiring

5GPSMAP 3000 Series Installation Instructions4. Thread the pole-mount adapter onto the pole. Do not overtighten the adapter.5. Route the GPS 17x cab

Page 7 - Unconnected

6 GPSMAP 3000 Series Installation InstructionsPower/Data Cable WiringThe following pages contain several wiring diagrams. The rst diagram on the next

Page 8 - Wiring to an Optional Alarm

7GPSMAP 3000 Series Installation InstructionsGPSMAP 3000 Series Chartplotter Wired to a GPS 17x+->>>>WhiteGreenRedBlackRedBlackWhite/Orang

Page 9 - Garmin Marine Network

8 GPSMAP 3000 Series Installation InstructionsWiring to an Optional AlarmThe GPSMAP 3000 series chartplotter can be used with a lamp, a horn, or both,

Page 10 - Final Wiring Connection

9GPSMAP 3000 Series Installation InstructionsGarmin Marine NetworkThe Garmin Marine Network is a waterproof ethernet-based system that allows Garmin c