Garmin 130 User Manual Page 24

  • Download
  • Add to my manuals
  • Print
  • Page
    / 132
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 23
18 Rino
®
130 Owner’s Manual
UNIT OPERATION > RADIO PAGE
When a Weather Alert tone is detected, the Rino 130
automatically turns on the Weather Radio and broadcasts
the Weather Alert if you are not actively transmitting or
receiving on the radio. The volume changes to 3/4 the
maximum when a Weather Alert is broadcast. Select
Disable Weather Alert to turn off this feature.
To turn the weather radio off, press the
Thumb Stick
In when Use FRS/GMRS Radio is highlighted. This
switches the Rino 130 back over to the FRS/GMRS radio
operation.
Turn Radio/GPS On/Off
Press the Thumb Stick In on either of these two options
to toggle them from on to off. For example, to turn GPS
Off, press the Thumb Stick In when Turn GPS Off is
highlighted.
Informational Picture
The Informational Picture on the bottom half of the Radio
Page features Garmin’s Mr. Mark Waypoint showing
current GPS and radio status, and radio actions. As you
operate the unit, the graphics change depending on what
actions you are taking and the unit settings.
GPS Status
Four satellites are shown on at the top of the picture along
with descriptive text to indicate GPS reception status.
As the unit collects satellite information, the satellite
symbols flash alternately until all four are steady to
indicate a 3D position fix. The more satellites that are
steady, the better your position fix.
Radio Transmission Status
As radio signals come in, signal wave symbols display to
the left of Mark Waypoint. Fragmented (or broken) signal
symbols are shown to indicate activity on that channel.
Audio remains muted because the incoming signal does
not match the squelch code your unit is set to.
Page view 23
1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 131 132

Comments to this Manuals

No comments