Garmin GPSMAP 6000 Series User Manual download pdf (Page 2)



WARNING

See the Important Safety and Product Information guide in the product box for product

warnings and other important information.

Turning On the Chartplotter

Press and release the Power key.

Turning Off the Chartplotter

Press and hold the Power key.

Turning the Chartplotter On or Off

Navigating to a Marine Service

Marking a Waypoint or an MOB Location

Using Combinations Screens

Adjusting the Backlight and the Color Mode

Go to www.garmin.com for additional documentation and information.

Garmin

, the Gamin logo, GPSMAP

, BlueChart

, and g2 Vision

are trademarks of Garmin

Ltd. or its subsidiaries, registered in the USA and other countries. These trademarks may not be

used without the express permission of Garmin.

November 2009 Part Number 190-01120-01 Rev. A Printed in Taiwan

Adjusting the Backlight

1. From the Home screen, select Congure > System > Beeper/Display > Backlight >

Backlight.

2. Adjust the backlight:

Select Auto to allow the chartplotter to adjust the backlight automatically, based on

ambient light.

Select Up or Down to adjust the backlight manually.

Adjusting the Color Mode

1. From the Home screen, select Congure > System > Beeper/Display > Color Mode.

2. Select

Day Colors, Night Colors, or Auto.

•

Marking Your Present Location as a Waypoint

From the Home screen, select Mark.

Creating a Waypoint at a Different Location

1. From the Home screen, select Information > User Data > Waypoints > New Waypoint >

Move.

2. Indicate the location of the waypoint:

Select Use Chart to move the waypoint while viewing a chart. For the GPSMAP 6000

series, use the Rocker to select a new location on the chart. For the GPSMAP 7000

series, touch a new location on the chart. Select Move Waypoint.

Select Enter Position to move the waypoint using coordinates. For the GPSMAP 6000

series, use the Rocker to enter the coordinates of the new location. For the GPSMAP

7000 series, use the on-screen keyboard. Select Done.

Marking and Navigating to an MOB Location

When you mark a waypoint, you can designate it as a

man overboard (MOB) location.

From any screen, select Mark > Man Overboard.

An international MOB symbol marks the active

MOB point and the chartplotter sets a course back to

the marked location using the Go To feature.

•

Selecting a Combination

1. From the Home screen, select Combinations.

2. Select a combination.

Customizing the Combinations Screen

NOTE: You can choose from only the options available to your chartplotter. To increase the

number of screens available, use a BlueChart g2 Vision data card or add network devices such

as sonar and radar.

1. From the Home screen, select

Combinations.

2. Select a combination.

3. Select

Menu > Change Combination.

4. Complete an action:

Select Functions to select the

number of combination screens.

Select a number.

Select Layout > Vert. to arrange

the screens in a vertical layout.

Select Layout > Horiz. to arrange

the screens in a horizontal layout.

Select Data Bar > On to show the horizontal bar that contains the data elds.

Select a numbered option, such as 1. Nav Chart or 2. Sonar in the image above, to

change the type of information shown in the corresponding screen.

5. Select

Done.

•

Navigating to a Marine Services Destination



CAUTION

The Auto Guidance feature of the BlueChart g2 Vision data card is based on electronic chart

information. That data does not assure obstacle and bottom clearance. Carefully compare the

course to all visual sightings and avoid any land, shallow water, or other obstacles that may be

in your path.

When using Go To, a direct course and a corrected course may pass over land or shallow water.

Use visual sightings and steer to avoid land, shallow water, and other dangerous objects.

NOTE: Auto Guidance is available with a preprogrammed BlueChart g2 Vision data card.

1. From the Home screen, select

Where To? > Offshore Services.

2. Select the marine service category to which you want to navigate.

The chartplotter shows a list of the 50 nearest locations and the distance and bearing to each.

3. Select a destination.

TIP: Select Next Page to view additional information or to show the location on a chart.

4. Select

Navigate To.

5. Complete an action:

Select Go To to navigate directly to the location.

Select Route To to create a route to the location, including turns.

Select Guide To to use Auto Guidance.

6. Review the course indicated by the magenta line.

NOTE: When using Auto Guidance, a gray line within any part of the magenta line indicates

that Auto Guidance cannot calculate part of the Auto Guidance line. This is due to the

minimum safe water depth and the minimum safe obstacle height settings.

7. Follow the magenta line, steering to avoid land, shallow water, and other obstacles.

•

Man Overboard

Combination

screen 1

Combination

screen 2

Data bar

1 2

Comments to this Manuals

No comments

Garmin GPSMAP 6000 Series User Manual Page 2

Comments to this Manuals

Related products and manuals for Radar detectors Garmin GPSMAP 6000 Series