Garmin GPSMAP 7407 User's Guide download pdf (Page 3)

video, and the IR-only cable provides infrared video only. The

V/IR video stream offers more flexibility when using one cable

only. When you need to connect the video stream directly from a

camera to a single chartplotter, you should use the V/IR cable.

For networks with an Axis video encoder, both cables can be

connected to the encoder, which is connected to the

chartplotter. See Multiple Network Camera Connection for

configuration details. This setup allows both the IR and V/IR

video streams to be displayed in a single chartplotter

combination screen. Using the video encoder allows these

streams to be viewed on any compatible networked chartplotter.

For a network with multiple chartplotters, you can connect one

FLIR composite video cable to each chartplotter, allowing side-

by-side display of each video stream.

Axis Network Cameras

When you add Axis network cameras to a Garmin Marine

Network, multiple camera feeds can be displayed on one

chartplotter screen. You can also display one network camera

feed on multiple Garmin chartplotters. When you connect an

Axis camera to your compatible chartplotter, the network detects

the camera automatically and displays it in the source list. You

do not need to configure the camera.

Garmin GPSMAP 7400, 7600, and 8000 series chartplotters are

compatible with many M, P, and Q series Axis cameras and

encoders. The chartplotters support Axis fixed-dome cameras,

including the P33 series cameras, and Axis network cameras,

including the P39-R series network cameras. These

chartplotters also support Axis pan/tilt/zoom (PTZ) model

cameras, including the Q60-S PTZ dome camera. You can

connect analog video cameras to Axis network encoders (up to

4-channel models), including the Q7424-R video encoder.

These chartplotters support the F4X family of main units with

connected sensors. Go to www.axis.com for a current list of

available F sensors, including the F10.

Axis Camera to Chartplotter Connection with a PoE

Switch

Item Description

Axis network camera

PoE IEEE 802.af or IEEE 802.at, depending on the Axis camera

model

PoE switch*

PoE isolator (GPN 010-10580-10)

GPSMAP chartplotter

*Not a Garmin part.

Axis Camera to Chartplotter Connection with a

Midspan PoE Injector

Item Description

Axis network camera

Axis midspan PoE injector (or equivalent)

PoE isolation coupler (GPN 010-10580-10)

GPSMAP chartplotter

Troubleshooting

Before you contact your Garmin dealer or service center, you

should perform a few simple troubleshooting steps to help

diagnose the problem.

My camera is installed but it is not in the video source

Powering up the chartplotters and cameras can take several

minutes to resolve. If the camera still does not appear, you

should complete these actions.

• Verify the power is connected.

• Verify the circuit breakers are set properly.

• Verify the Power over Ethernet (PoE) adapter power is on.

• Verify the Ethernet cable is connected to your chartplotter.

• Verify your routers and switches are on and functioning.

• Verify the camera is working. See your camera owner's

manual for camera troubleshooting information.

• Verify the camera is compatible with Garmin systems. See

Axis Network Cameras for more information on camera

compatibility.

My video displays but I cannot control the FLIR

camera

• Verify the correct video input source (built-in or Axis video

encoder) is associated with the FLIR camera. See Changing

the Associated Video Input Device for a FLIR Camera for

more information.

• Verify you selected the correct camera when associating the

camera with the chartpotter .

My chartplotter cannot access my Axis camera

The chartplotter uses the Axis camera's default password to

initially access the camera. When the chartplotter cannot

connect to the camera because of mismatched passwords, the

chartplotter displays a message that it cannot connect to the

camera. When this message appears, you must reset your Axis

camera password to its factory default settings. Go to

www.axis.com for instructions on resetting the camera to factory

default settings.

My chartplotter combination screen will not allow a

second built-in video source

Depending on the model, Garmin chartplotters can have up to

four built-in, or composite, video inputs. Each input can receive

a standard composite video feed from a camera. Combinations

can be configured to display multiple video sources, but only a

single video function within a combination can use a composite

video input connection to the chartplotter. To display up to four

analog video streams in one combination screen, you can add

an Axis video encoder to your network. See Multiple Network

Camera Connection for configuration details.

1 2 3 4

Comments to this Manuals

No comments

Garmin GPSMAP 7407 User's Guide Page 3

Comments to this Manuals