Garmin Software Version 0401.30 User's Guide Page 40

  • Download
  • Add to my manuals
  • Print
  • Page
    / 102
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 39
Garmin G1000 Cockpit Reference Guide for the Mooney M20M, M20R, & M20TN
190-00450-04 Rev. A
24
Flight Planning
Flight
InstrumentsEIS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
Selecting ‘FPL 00’ displays the active flight plan. If an active flight plan
is selected, ‘REM’ is an available option to display planning data for the
remainder of the flight plan.
NOTE: The page mode must be set to ‘MANUALto perform the following
steps.
5)
Turn the large FMS Knob to highlight the departure time (DEP TIME) field.
NOTE: The departure time on the Trip Planning Page is used for preflight
planning. Refer to the Utility Page for the actual flight departure time.
6)
Enter the departure time. Press the ENT Key when finished. Departure time
may be entered in local or UTC time, depending upon system settings.
7)
Enter the fuel flow. Press the ENT Key when finished. Note that in AUTOMATIC’
page mode, fuel flow is provided by the system.
8)
The flashing cursor moves to the fuel onboard field. Modify the fuel onboard.
Press the ENT Key when finished.
9)
The flashing cursor moves to the calibrated airspeed field. Enter a calibrated
airspeed. Press the ENT Key when finished.
CREATE A NEW USER WAYPOINT
1)
Turn the large FMS Knob to select the ‘WPT’ page group.
2)
Turn the small FMS Knob to select the User WPT Information Page.
3)
Press the NEW Softkey. A waypoint is created at the current aircraft
position.
4)
Enter the desired waypoint name.
5)
Press the ENT Key.
6)
The cursor is now in the ‘REFERENCE WAYPOINTS’ field. If desired, the
waypoint can be defined by a reference waypoint. Use one of the following
methods to enter the reference waypoint:
a)
Turn the small FMS Knob to the left to display a list of flight plan
waypoints. This list is populated only when there is an active flight
plan.
b)
Turn the large FMS Knob to select the desired waypoint.
c)
Press the ENT Key.
Page view 39
1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 101 102

Comments to this Manuals

No comments