Garmin GPS Receiver 400/500 User Manual Page 18

  • Download
  • Add to my manuals
  • Print
  • Page
    / 76
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 17
10
TIS Operational Procedures
Section 3
Manual Override
The user can manually switch between standby (STBY) and operating (OPER) mode of operation to
manually override automatic operation.
To place the display into operating mode from the standby mode
(to display TIS traffic):
1. Turn the cursor on and highlight ‘STBY’.
2. Turn the
small right knob to select ‘OPER?’
3. Press ENT to confirm.
To place the display into standby mode from operating mode
(to stop displaying TIS traffic):
1. Turn the cursor on and highlight ‘OPER’.
2. Turn the
small right knob to select ‘STBY?’
3. Press
ENT to confirm.
Flight Procedures
Once the aircraft is airborne (determined by system configuration at the time of installation) the system
switches from standby mode to operating mode. The 400/500 Series unit displays OPER in the upper right
hand corner of the display and begins to display traffic on the Traffic or Map Page.
The TIS Traffic Advisory (TA) should alert the crew to use additional vigilance to identify the intruding
aircraft. Any time the traffic symbol becomes a yellow circle or a voice warning is announced, conduct a
visual search for the intruder. If successful, maintain visual contact to ensure safe operation. See page 5 for
a description of pilot responses to TIS display messages.
After Landing
Once the aircraft is “groundborne” (determined by system configuration at the time of installation)
the system switches from operating mode to standby mode. The 400/500 Series unit displays ‘STBY’. As
described previously, both the standby and operating modes can be manually overridden by the display
controls.
‘DATA FAIL’ Message
The ‘NO DATA’ message indicates that data is not
being received from the GTX 330.
NOTE
: This may be a normal mode of operation
in a dual transponder installation where the GTX
330 with TIS is not the selected transponder.
Page view 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 75 76

Comments to this Manuals

No comments