Garmin 407GX User's Guide Page 130

  • Download
  • Add to my manuals
  • Print
  • Page
    / 158
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 129
Garmin G1000H
Cockpit Reference Guide for the Bell 407GX
190-01254-00 Rev. B
114
Annunciations & Alerts
Flight
InstrumentsEICAS
Nav/Com/
XPDR/AudioAFCSGPS Nav
Flight
PlanningProcedures
Hazard
Avoidance
Additional
Features
Abnormal
Operation
Annun/
AlertsAppendixIndex
GIA 63H MESSAGE ADVISORIES (CONT.)
Message Comments
NAV1 RMT XFR
– NAV1 remote
transfer key is stuck.
The remote NAV1 and/or NAV2 transfer switch is
stuck in the enabled (or “pressed”) state. Press
the transfer switch again to cycle its operation.
If the problem persists, the system should be
serviced.
NAV2 RMT XFR
– NAV2 remote
transfer key is stuck.
G/S1 FAIL
– G/S1 is inoperative.
A failure has been detected in glideslope
receiver 1 and/or receiver 2. The system should
be serviced.
G/S2 FAIL
– G/S2 is inoperative.
G/S1 SERVICE
– G/S1 needs service.
Return unit for repair.
A failure has been detected in glideslope
receiver 1 and/or receiver 2. The receiver may
still be available. The system should be serviced
when possible.
G/S2 SERVICE
– G/S2 needs service.
Return unit for repair.
GEA 71H MESSAGE ADVISORIES
Message Comments
GEA1 CONFIG
– GEA1 config error.
Config service req’d.
The GEA1 configuration settings do not match
those of backup configuration memory. The
G1000H system should be serviced.
MANIFEST
– GEA1 software
mismatch, communication halted.
The #1 GEA 71 has incorrect software installed.
The G1000H system should be serviced.
GTX 33H MESSAGE ADVISORIES
Message Comments
XPDR1 CONFIG
– XPDR1 config
error. Config service req’d.
The transponder configuration settings do not
match those of backup configuration memory. The
system should be serviced.
MANIFEST
– GTX1 software
mismatch, communication halted.
The transponder has incorrect software installed.
The system should be serviced.
XPDR1 SRVC
– XPDR1 needs
service. Return unit for repair.
The #1 transponder should be serviced when
possible.
XPDR1 FAIL
– XPDR1 is inoperative.
There is no communication with the #1
transponder.
Page view 129
1 2 ... 125 126 127 128 129 130 131 132 133 134 135 ... 157 158

Comments to this Manuals

No comments