Garmin GPS 100 User Manual download pdf (Page 74)

· Move the cursor over the cyclic field to the right of “OUTPUT” and

press the CLR key to select the desired output format.

· Move the cursor over “OK?” and press the ENT key.

11.8 WAYPOINT/ROUTE TRANSFER

DATA TRANSFER PAGE

Waypoints and routes may be transferred from one GPS 100 to another, or

from a PC to a GPS 100. The Data Transfer Page allows you to select the

desired data transfer operation (receive waypoints/routes or transmit

waypoints/routes). Data transfer operations require an optional PC kit or

data transfer cable.

One of two methods may be chosen to receive waypoints and routes from

a PC or from another GPS 100. “RECEIVE (UPDATE)” allows the unit to

receive new waypoints and routes without deleting old waypoints and routes

not changed by the receive operation. “RECEIVE (REPLACE)” deletes all

of the unit’s old waypoints and routes, including waypoints used in proximity

alarms, and replaces them with new waypoints.

To transfer waypoints and routes from a PC to a GPS 100...

· Select “RECEIVE (UPDATE)” or “RECEIVE (REPLACE)” on the

Data Transfer Page.

· Move the cursor over “OK?” and press the ENT key.

· Run the PC upload program.

· The GPS 100 will display the message “WPT/RTE RX STARTED”

when the first data record is received. The number of waypoints and

routes received will be displayed on line 2.

· The PC will indicate when the transfer operation is complete.

Number of Routes

Transmitted/Received

Number of Waypoints

Transmitted/Received

Transfer Select Field

11-12

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 112 113

No comments

Garmin GPS 100 User Manual Page 74