Garmin GPSMAP 2110 User Manual download pdf (Page 22)

14 GPSMAP 2106/2110 Owner’s Manual

bAsIc oPerAtIon > creAtIng And usIng wAyPoInts

To create a new waypoint from a map feature:create a new waypoint from a map feature:

1. Use the ROCKER to move the map pointer and highlight the map feature

you want.

2. Press ENTER/MARK to capture the pointer location. The Review Page for

the selected map feature appears.

3. Press the Create Wpt soft key to open the Review Waypoint Page.

4. To accept the waypoint with the default information, press ENTER.

To change any waypoint information, highlight the appropriate eld and

press ENTER. After entering your changes, press the OK soft key.

Creating a Waypoint from a Map Feature

(BlueChart g2 Data shown)

Creating Waypoints Manually

You can manually enter position coordinates to create a waypoint using the Points

tab on the Main Menu. This method is useful for creating a waypoint at a specic

latitude/longitude position from a chart or other source.

CAUTION: When entering a waypoint manually, be sure that the unit is set

to the same position format and map datum as the paper chart or coordinates

source. Entering coordinates into the GPSMAP 2106/2110 while it is set to

a datum different from the datum in which the coordinates were created can

result in an incorrect waypoint location.

Enter location

coordinates

manually.

Review Waypoint Page

To create a new waypoint by entering position coordinates:

1. Press and hold ADJ/MENU to open the Main Menu.

2. Highlight the Points tab. You can also mark your present location using

the steps on page 13, and then proceed to step 4.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 105 106

No comments

Garmin GPSMAP 2110 User Manual Page 22