Garmin GPSMAP 396 User Manual download pdf (Page 102)

94 GPSMAP 396 Owner’s Manual

MArIne Mode PAges And feAtures > coMPAss PAge

Using the Marine Timer

The Marine Timer, specically designed for sail boat racing,

allows you to easily count up or down specied time increments.

As common in sail boat racing, there is often a 5-minute warning

countdown, followed by a 4-minute preparation countdown, and

nally a one-minute nal countdown. You must change the Compass

Page layout to use the Marine Timer.

To open the Marine Timer:

1. Press PAGE repeatedly until the Compass Page appears.

2. Press MENU.

3. Use the ROCKER to highlight Set up Page Layout, and

press ENTER.

4. Highlight 2 Columns With Timer, and press ENTER. The

Marine Timer appears in the lower right corner.

To use the Marine Timer:

1. Press the ROCKER up or down to select the time you want to

count. Five (5) minutes is the default.

2. Press ENTER to start the timer. Use the ROCKER during the

timing to quickly select a different length of time.

3. Press ENTER to stop timing.

Marine Timer on the Compass Page

As discussed previously, the timer is set to count down ve minutes.

If you want to change the length of time and the behavior or the

timer, open the Timers Setup tab in the Main Menu.

To set the Marine Timer:

1. Press MENU twice to open the Main Menu.

2. Press the ROCKER down to select Setup and then right to

select the Timers sub tab.

3. Highlight Stop next to Marine, and press ENTER to change

the timer’s behavior. Highlight the behavior you want, and

press ENTER.

4. Highlight the time eld, press ENTER, and then use the

ROCKER to enter a new time. The maximum time is 60:00

(minutes: seconds). Press ENTER when nished.

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 191 192

No comments

Garmin GPSMAP 396 User Manual Page 102