Garmin GPS 55AVD User Manual download pdf (Page 20)

3-4

To change the latitude/longitude...

· Use an arrow key to place the cursor under the latitude field.

· Check the hemispheric designation (“N” or “S”) of the latitude. If it is

correct, go to the next step. If it is incorrect, press the CLR key until

the correct hemispheric designation is displayed.

· Enter the latitude (remember to complete the data entry by pressing

ENT).

· Check the hemispheric designation (“E” or “W”) of the longitude. If it

is correct, go to the next step. If it is incorrect, press the CLR key until

the correct hemispheric designation is displayed.

· Enter the longitude (remember to complete the data entry by pressing

ENT).

3.4 AUTOSTORE

Waypoint

Name Storage Selection

Latitude

Longitude

AUTOSTORE

PAGE

The AutoStore

Page is displayed by pressing the ENT key while viewing

the Position Page. This page allows you to capture your position at the touch

of a button so that you may easily return later. Additionally, you may record

your navigation path by inserting the captured waypoints into a route (see

Section 6.5).

To capture your present position...

· Press NAV until the Position Page is displayed.

· Press ENT. The AutoStore

Page will be displayed with the default

waypoint name on line one. The waypoint name begins with a “+”

character followed by a 3-digit number, for example “+010”.

· If you wish to give the waypoint a name of your own, move the cursor

under the waypoint name and enter the name of your choice.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 87 88

No comments

Garmin GPS 55AVD User Manual Page 20