Garmin GPS 150 User Manual download pdf (Page 77)

Appendix A

NavData

and User Data Installation and Operation

The NavData card supplied with your GPS 150 can be installed or removed ONLY

when the GPS 150 is turned off.

Insert the card with the thumb tab

at the top, and the beveled corner on

the bottom right.

The User Data card can be used to make a backup of user waypoints, routes,

checklists, proximity alarms, etc. for later reference and use. The UserData card can

also be used to transfer the same information to another GPS 150.

To save the user data to the User Data card:

1. Install the UserData card while the unit is off.

2. Turn the GPS 150 on by rotating

clockwise.

3. Rotate

to highlight ‘Save user data?’.

4. Press

The message ‘Saving to card’ is displayed while the GPS 150 transfers all user data

to the User Data card. It may take a few minutes to complete the transfer. When all

user data is transferred, the GPS 150 will instruct you to turn the unit off, remove the

user card and insert the Jeppesen NavData card. After this is complete, the GPS 150 is

ready for normal operation.

APPENDIX A

NavData & UserData Cards

User Data cards are available from

your local GARMIN dealer.

User Data card transfers.

Message following User Data card transfer.

150man rev E 7/24/98 3:11 PM Page 67

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 97 98

No comments

Garmin GPS 150 User Manual Page 77